Stop corrosion and mineral build-up
from your condenser coil mister
with Cool Release™.
A safe and non-toxic in-line water treatment system that controls scaling that can occur from central air conditioning misters.
Need to purchase a replacement Cool Release™ cartridge for your Cool-n-Save unit? Click here.
When the ultra-fine mist is released into the air, it evaporates almost instantly creating what is known as a “Flash Evaporation,” which literally sucks heat out of the air as water absorbs the energy it needs to evaporate. The result of the immediate evaporation constitutes a substantial drop in ambient temperature without wetness—up to 30 degrees Fahrenheit.
But any engineer will also tell you that when you apply water mist to the condenser coils of a central AC unit, there’s always the danger of leaving unwanted deposits on the coils. The inventors of Cool-n-Save solved that problem too!
A water treatment system that helps keep your air conditioning system safe and clean.
Cool Release™ is an advanced in-line water treatment system designed to control scaling that may occur due to mineral deposits found in your water. A 3-month cartridge is included with every Cool-n-Save® kit. That’s all you need. We advise that you replace expended cartridges to ensure trouble-free benefits of Cool-n-Save.
Cool Release water treatment chemically neutralizes common sediment and other chemicals found in your water that could clog the micro nozzles. Non-phosphate polyacrylate agents also attack scale-forming calcium molecules and distorts their geometry so that they cannot adhere to surfaces. Treated minerals are further dispersed through the water and washed away with minimal adhesion to critical components of your air conditioning unit.
Less than 6c of water per day keeps the heat away.
Two years of work went into to Cool Release water treatment technology. We enlisted the help of the nation’s foremost experts in water treatment technology to ensure that Cool-n-Save delivers a sustainable solution to spiraling energy costs.
Cool-n-Save uses less than 6c of water per day. Even combined with the cost of replacement treatment cartridges, you’re way ahead in terms of cost savings from reduced energy use. Most of our customers make back the whole cost of the kit in the first season.
Cool Release will eliminate most scale-causing minerals, but in some extreme cases, residue may still develop. We have found that areas characterized extreme atmospheric heat (in excess of 100°F for more than 40 days a year), low relative humidity (below 30%), and higher than normal levels of dissolved minerals in local water supply may leave enough mineral in the mist water to develop ‘dry spray’ residue on coils, fins, and other surfaces.
If you live in an area where all three conditions exist, check the Cool Release water treatment system to ensure that it is working properly; replace water treatment cartridges when they expire; and if necessary, clean the cooling fins and coils with a SOFT brush and a 50/50 mixture of vinegar and water, or a foaming coil cleaner.
Note that we do not recommend using Cool-n-Save without a functioning Cool Release water treatment cartridge. Even if your home is equipped with a water softening system, some particulates and sediment could remain and clog the micro mist nozzles.
Check out our shopping area for all Cool-n-Save products.